Holiday Candy Jar

xmas jar by candy spiegel8I know it’s 85 degrees outside, but I was in a bit of a holiday mood and etchall was calling my name … I recently accepted a position as an elite etchall ambassador so you will see plenty more etchall projects to come ….

xmas jar by candy spiegel

I love to reuse food containers — especially jars. This one was previously filled with artichoke hearts.

xmas jar by candy spiegel2I used a die from Elizabeth Craft Designs to cut vinyl (this is from Cricut) to create the design. However, since I wanted the trees and landscape to be snowy and etched, I used the leftover part of the vinyl, rather than the part the die actually cut out. (I hope that makes sense) I adhered it to the jar and made sure all of the edges were firmly adhered.

xmas jar by candy spiegel3Then, I added a Peel-Off Sticker, from Elizabeth Craft Designs. Carefully use the squeegee from etchall (in photo below) to make sure everything is secure and there are no air bubbles.

xmas jar by candy spiegel5

Next, I applied a thick layer of etchall. I pour some into a plastic container and apply it with the squeegee from etchall. A paintbrush just does not seem to get it on thick enough.

Once it is all on, let it sit for 15 minutes.

Then, use the squeegee to scrape it off and put it back into the container (it is reusable!). I then take a paper towel and wipe off as much as I can … this is an acid and it can “etch” your sink if you are not careful. Next, take the jar to sink and run the water and wash off the remaining etchall and remove the stickers and stencils. I then quickly wash the jar with dish soap. It is that easy!

xmas jar by candy spiegel4

 

I did the lid while waiting for the etchall to work. First I cut out a circle from patterned paper and used my Xyron machine to adhere it to the lid. Then, I drilled a hole in the lid for the screw and attached the knob (from Hobby Lobby).

xmas jar by candy spiegel7

Once the jar was completely dry, I added Glittered Peel-Off Stickers from Elizabeth Craft Designs. I love these deer and I scattered them around the etched landscape. If you carefully wash the jar, they will remain adhered.

xmas jar by candy spiegel9

Then I added a ribbon from Stampin’ Up and some candy and the jar is complete.

xmas jar by candy spiegel6

It took less than an hour and used mostly leftover products, so it was practically free! I think it will make a beautiful little gift. What do you think?

(NOTE: I received product from etchall in exchange for this post).